Advertisement
Home | Error Codes | Camshaft Position Timing Over Advanced (Bank 1): P0011 Code

Camshaft Position Timing Over Advanced (Bank 1): P0011 Code

March 3, 2024 | Victor Lukasso
SHARE THIS…

Did you read the codes on your car’s computer using an OBD-II scanner, and it reads “Camshaft Position Timing Over Advanced Bank 1 – P0011 code” on display? Here’s all you need to know.

One generic OBD-II code standard with car manufacturers is the P0011 code. Generic mean that it’s shared across car manufacturers, but vehicles using the variable camshaft Timing is more likely to be affected by this trouble.

The P0011 code is standard among car brands such as Nissan, Subaru, Chevrolet, GMC, and Hyundai.

The P0011 code, which stands for “Bank 1” Camshaft Position Timing Over Advanced, indicates that the PCM cannot correct a noticeable slight difference in the actual position angle of the camshaft and the desired position angle.

Advertisement

Please continue reading to know everything about the P0011 error code, including its meaning, causes, symptoms, diagnosis, and fixing.

What is a camshaft position timing over advanced bank 1?

The Camshaft Position Timing Over Bank 1, also referred to as the P0011 code, indicates that the Engine Control Module (ECM)/Powertrain Control Module(PCM) has identified a disparity between the intended angle of the camshaft position and its actual position which has been unable to rectify.

Recommended:  P0116 Code: Definition, Symptoms and How to Fix ECT Error Code

Essentially, the computer is trying to achieve a specific target angle for the camshaft, but the sensors indicate that it is impossible.

Regarding the Bank 1 or “A” reference, it usually denotes that the intake camshaft is in an inline overhead camshaft engine. Similarly, in an engine with a V configuration, the “A” often indicates the intake camshaft on Bank 1.

What causes camshaft position timing over advanced?

A proper diagnosis is required to determine the exact cause of the P0011 code because several factors can cause your car to display the camshaft Timing over advanced code.

It might be from an open valve control solenoid, a faulty camshaft actuator, a damaged timing component, or an improperly configured camshaft timing,

Here’s a complete list of things that can cause camshaft position timing over the advanced error on your car’s dashboard.

  • Low Engine Oil Level
  • Camshaft Timing is Off
  • An open or faulty oil valve control solenoid
  • Circuit troubles
  • Faulty camshaft actuator
  • Contaminated Engine Oil
  • PCM software issues
  • Weak or loose timing belt
  • Damaged timing components, etc.
Recommended:  Crankcase Pressure Sensor | Error P051B Code

While fixing the P0011 code may be as simple as adding oil to your Engine, other complex causes may require a mechanic’s assistance.

Symptoms of camshaft position timing over advanced

Here are some signs your car will exhibit once it runs into the camshaft position timing over advanced bank 1 error.

  1. Poor Idling
  2. Stalling
  3. Illuminated Check Engine Light
  4. Increase fuel mileage
  5. Engine misfire
  6. Rattling noise from the Engine
  7. Failed emission test
  8. Difficulties starting the Engine, etc.

Aside from the above list, the symptoms you experience on your vehicle may differ depending on the camshaft timing positions.

How to Diagnose P0011 Error Code

While the camshaft position timing over advanced bank 1 error might look easy to fix, diagnosing the exact cause of the problem is complex.

You’ll need to be experienced in auto repairs before you can easily decipher what led to the error code on your dashboard. Thus, we at V. Auto Basics advise taking your car to a professional mechanic for a proper diagnosis.

However, you can try inspecting the wiring connections on your car, checking if there’s enough oil in the Engine, and performing a pinpoint test if the problem persists.

Regardless, you can follow the next sub-heading if you want to learn possible ways to eliminate the P0011 code.

Recommended:  A Complete list of OBD-II U Error Codes

How do I fix the error code P0011?

There’s no one fix to resolving the error code P0011; the fix could be as simple as topping up your engine oil or resetting the check engine light. Meanwhile, it may be a complex issue on another car.

A proper diagnosis is required to get the root cause of the problem before implementing any fix.

However, here are some fixes you can follow to fix the error code P0011 on your vehicle.

  • Changing the oil filter
  • Checking and adjusting the timing chain alignments
  • Resetting the error codes on the OBD-II scanner and performing a road test
  • Repairing or replacing damaged wiring connections.
  • Replacing the VVT solenoid or oil control valve for bank 1 intake camshaft.

In diagnosing and fixing the Error code P0011 by yourself, ensure to replace every displaced component to its original spot to prevent problems.

However, consult a professional mechanic closest to your location for the best fixes.

As an Amazon Service LLC Program Associate, V. Auto Basics earns from qualifying purchases. See Our Affiliate disclaimer.

SHARE THIS...
Advertisement

Meet Victor Lukasso, the owner of V. Auto Basics. Through this blog, Victor Provides Insights on the latest tips, maintenance, repair, and techniques in the automotive world.

Advertisement