Advertisement
Home | Error Codes | Error P0343 Code – A Detailed Overview

Error P0343 Code – A Detailed Overview

February 28, 2024 | Victor Lukasso
SHARE THIS…

The error P0343 is one of the most known OBD-II P problem codes associated with the camshaft position sensor circuit.

In this article, I will show you possible reasons why your vehicle will run into the P0343 error, symptoms to watch out for, and ways to repair the error code.

What is the P0343 Code?

P0343 is a trouble code used to represent the camshaft position sensor circuit’s high input, implying that the PCM is getting an abnormally high reading from the camshaft position sensor.

Advertisement

Recall that the PCM uses the rotational speed of the camshaft to determine the right amount of fuel and ignition timing; however, when the P0343 code sets in, it’ll receive a voltage much higher than the manufacturer’s reading, thereby making your engine unable to create a spark.

Recommended:  Check Engine Light on But Car Engine Runs Fine

Causes of the Error P0343 Code

You’ll probably get an error P0343 code due to one or more of the following reasons.

  1. Malfunctioning or Dead Battery
  2. A defective starter motor
  3. A bad sensor motor
  4. Wear and tear
  5. Corrosion
  6. Water or oil-logged engines
  7. Problematic wiring between the PCM and the camshaft sensor
  8. An open or shortened Sensor
  9. A defective camshaft position sensor
  10. Unprofessional sensor installation

I want to emphasize the wiring harness between the PCM and the sensor; it’s important to visually inspect the wiring and check for tangled spots before trying other fixes.

Taking the vehicle to a professional auto mechanic should be your last resort if you can’t find the cause of the P0343 code on your own.

Symptoms of the Error P0343 Code

Due to a faulty camshaft position sensor, the PCM will likely receive an incorrect signal leading to the P0343 code. Here are some symptoms to look out for.

  • Engine Start problems
  • Bad driving experience
  • The check engine light will illuminate
  • Constant bucking and surging of a vehicle
Recommended:  Error P0200 Code: Causes and Fixes

How to Fix P0343 Code

Here are some fixes you can try out if you ever run into the error P0343 code

  1. Battery replacement
  2. Blocking and cleaning oil leakages
  3. Cleaning and blocking water access
  4. Damaged wiring or connector replacement
  5. Camshaft Position Sensor replacement

You can also close any open wiring harness between the PCM and the sensor to allow adequate transmission of signals.

You can also take your vehicle to an auto mechanic if you get stuck while trying to fix the P0343 code.

How Serious is the P0343 Code?

While it’s encountered chiefly with the Chevrolet, Kia, Volkswagen, and Hyundai models built around 2003 – 2005, it’s a critical issue since it involves fuel injection and ignition timing.

It can affect your driving experience, especially on a long trip; modern vehicles aren’t exempted.

The best you can do is repair the error code as soon as possible to avoid causing damage to other parts of the engine.

FAQs

Common mistakes to avoid when diagnosing the P0343 Code

Using high-quality replacement parts (OEM parts) rather than cheap or used parts is essential. Also, avoid ignoring the wiring and battery life while making a diagnosis.

Recommended:  Why is My Check Engine Light On but no Codes

Related codes to P0343 code

The P0342 and P0341 codes are related to the P0343 code since they all relate to the camshaft position sensor. P0341 indicates a low range, P0342 indicates a low signal, and P0343 means a high signal to the PCM.

Diagnosing all three codes on your vehicle simultaneously means that your sensor is terrible and would need electrical attention or a replacement.

Is it worth repairing the camshaft?

It’s not advised to repair a camshaft, although there are high-performance engines where it can be fixed.

A new camshaft is advised since it’s cost-effective for an average road user.

Conclusion

Leaving the error P0343 code unresolved for a long time could result in other higher OBD-II problem codes.

So, it’s best to use the above fixes to eliminate it once and for all.

RESOURCEFUL LINKS

— Error P0342 Code – Definition, Causes, Symptoms, and How to Fix it

As an Amazon Service LLC Program Associate, V. Auto Basics earns from qualifying purchases. See Our Affiliate disclaimer.

SHARE THIS...
Advertisement

Meet Victor Lukasso, the owner of V. Auto Basics. Through this blog, Victor Provides Insights on the latest tips, maintenance, repair, and techniques in the automotive world.

Advertisement