Home | Brakes | Brakes Grinding When Stopping? Check this Out

Brakes Grinding When Stopping? Check this Out

March 19, 2024 | Victor Lukasso

This article addresses a concern commonly experienced by car owners: the one of “Brakes Grinding when stopping.

Faulty Brakes are likely to produce a grinding Noise for some reason when applied; what then should you do if you hear a grinding noise, especially when stopping?

This matter needs urgent attention, not only because of its unappealing noise but because it’ll cause severe damage if not fixed on time.

Before I proceed, faulty Brakes make three types of noise, a grinding noise when applied, a thumping noise when braking, a scraping sound when driving /braking, and a squeaky sound when driving or braking.


And the exciting part is that; new brakes aren’t exempted from making this squeaky sound. However, if you’re wondering, “Why are my brakes grinding on stop,” this article is for you.

In this article, I will show probable reasons why your brake pad is grinding when stopping and how to fix it.

Brakes Grinding When Stopping – Why?

Brakes come in different brands and quality; a grinding brake indicates total wear and tear of your brake pads.

A brake pad is supposed to be changed between 10,000 to 20,000 miles when the wear is minimal; if you ignore possible squeaky sounds and it escalates to grinding noises, then it’s your fault.

Recommended:  Why are my Brake Squeaking After being Replaced?

A grinding noise should be treated as urgent to avoid breeding other car faults.

Here are the main reasons your brake pads will make a grinding noise when stopping.

1. Cheap and Low-Quality Brake Pads

The most common cause of frequent grinding, even when the brakes are, is inferior brake pads.

While the price might look cheap, they won’t be able to serve you as the high-quality ones would. This is primarily because of the large metal flakes embedded in the brake material, which frequently squeak when it comes to the rotor.

If you’ve used a high-quality brake pad before now, you might not notice when these inferior pads will wear out and greet you with a grinding noise when stopping.

The best way to escape this situation is to avoid low-budget brake pads and go for quality.

2. Brake Wear indicator making contact with the rotor

As time goes on, the brake pad becomes uneven and needs replacement. During installation, there’s a tiny metal attached to the brake pad, which relays signal on the condition of the brakes.

Once brake pad wear occurs, the brake Wear indicator will lose balance and start making contact with the rotor, which makes a rotational movement.

It would be best if you got regular checks on your rotor and pads for uneven wear or build-up.

3. Grazed Rotors

Over time, the rotors can create build-ups that’ll make it look irregular, making it hard for new brake pads to fit in.

Recommended:  Which Pedal is the Brake in an Automatic Car

If you forcefully install the new brake pads, it’ll cause your car to produce a squeaky sound due to friction between the two bodies.

This will also cause increased wear and tear on the new brake pads, eventually producing a grinding sound in no time.

While you can get a rotor replacement, you can likely check if your mechanic can help resurface them.

4. The brake pads material

Semi-metallic brake pads are the best choice for car owners, we also have ceramic brake pads which work perfectly for some cars, but it produces lots of noise.

So to get rid of hastened brake pad wear, get a brake pad with the best material.

5. Insufficient lubrication

Cars equipped with the drum braking system usually encounter this issue, and new and old brake pads can be affected.

The pistons press against the drum braking, and if there’s Insufficient oil, it’ll give out a squeaking sound.

You can resolve this by applying brake lubricant to the affected point, the backing plate.

How to Fix a Grinding Brake

The only way to fix a save your brakes from grinding is by replacing the worn-out brake pads with a new high-quality ones.

If you’re on the highway when you hear the grinding noise, park your car and seek the service of a towing company.

Take your car to a mechanic and have the brake pads replaced, and don’t forget to inspect the damages that might have been done to the rotors.

You can get a rotor replacement if the damage is too much, or better still, avoid driving for long after the grinding noise comes up.

How to Stop Brakes from Grinding when Stopping?

The recommended way to stop new brakes from grinding is to install high-quality brake pads and replace worn-out uneven brake pads.

Recommended:  Air Sound When Pressing Brake Pedal? Causes and Fix

Let’s get to the details of these fixes.

1. Always install High-Quality Brake Pads

Avoid using cheap and Low-Quality Brake Pads on your car; while they are cost-friendly, they won’t serve you half the period a quality brake pad will.

High-quality brake pads will also boost your morale on the highway since the inferior brake pads could fail anytime, producing a grinding sound.

2. Rotor Resurfacing or Replacement

If your rotors have developed irregularities that’ll make them not accommodate the brake pads, then it’s essential that you either resurface or replace them.

A rotor can last between 50,000 to 70,000 miles before a mandatory replacement can be required.

The Resurfacing can be done manually by applying sandpaper on the irregular surface to remove metal build-up.

3. Brake Pads Replacement

The best fix to a grinding noise while driving is replacing worn-out brake pads.

Do change your brake pads for minimum wear after running between 10,000 to 20,000 miles.

That’s all about why your brakes are grinding when stopping.


Can I drive with brake pads grinding?

No, it’s not advisable to continue driving with grinding brake pads. Call the attention of a mechanic and get the worn-out brake pad replaced immediately.

Should I be worried if my brakes are grinding?

Yes, a grinding brake indicates that your braking system is problematic, and it should keep you worried because failure to make necessary fixes on time will escalate the issue.

Will replacing brake pads stop grinding?

Yes, replacing worn-out brake pads will stop the grinding noise in your car.

Why are my brake pads grinding?

A grinding brake denotes that the brake pads have worn out, and the bare metal is now making contact with the rotor.

As an Amazon Service LLC Program Associate, V. Auto Basics earns from qualifying purchases. See Our Affiliate disclaimer.


Meet Victor Lukasso, the owner of V. Auto Basics. Through this blog, Victor Provides Insights on the latest tips, maintenance, repair, and techniques in the automotive world.